Home Fault Codes

Amana Dishwasher Error Code 1 Pause 1 Pause: Meaning and Fix

1 Pause 1 Pause
How 1 Pause 1 Pause appears on a Amana dishwasher display.
Amana dishwasher Facia Control Panel (part number 99002521), the component to check for code 1 Pause 1 Pause
Product photo courtesy of AppliancePartsPros.com

Also shown as: 1Pause1Pause, 1-Pause-1-Pause

Reading the dishwasher display

A dishwasher reports its fault in the display window, or by blinking a cycle light a set number of times with a pause between groups. Count the blinks and pauses before opening the door. Amana models often flash lights instead of printing text, so count the flashes.

Amana is a Whirlpool Corporation brand sold mostly through builder and value channels. Its entry-level washers, dryers and ranges use the simpler Whirlpool-family control boards, so the codes are short and often shown as flashing lights. The codes apply to model numbers such as ADB1200AWS, ADB2200AWS and NDE2330AYW; check the label on your unit to confirm yours.

What causes 1 Pause 1 Pause

How to fix it

  1. Cycle the power: switch off the dishwasher breaker for about a minute (or unplug it if you can reach the cord), restore power and run a short cycle.
  2. Disconnect power for the recommended time, then restart and press each key to see if one sticks.
  3. Clean the panel with a barely damp cloth and check around the keys for spills or swelling.
  4. With power off, reseat the ribbon cable or harness between the panel and the main control.
  5. Replace the user interface or touchpad if the code returns, then confirm every key responds.
  6. Run a full short cycle or function again and confirm the code stays gone before putting the appliance back into normal use.

Parts you may need

PartPart no.Buy
Facia Control Panel99002521Find part
Assembly Control KnobWP9706648Find part

Part numbers are OEM references; confirm fit by your model number before ordering. Some links are affiliate links; we may earn a commission at no extra cost to you.

Questions

What does 1 Pause 1 Pause mean on a Amana dishwasher?

It is a fault code from the Amana control. It indicates a problem with the control panel, specifically the control module. A power reset is the first thing to try.

Can I keep using the dishwasher while it shows 1 Pause 1 Pause?

You can try it after a power reset. If the code returns, the affected function may not run properly, so it is worth fixing soon before it causes a bigger failure.

Do I need a technician to clear 1 Pause 1 Pause?

Many owners can fix it themselves. Start with the reset and the inspection steps, and only call a technician if the part tests bad and you do not want to replace it.

Other Amana dishwasher codes

Amana dishwasher Valve Inlet (part number W11175771), the component to check for code 10 Pause 5 Pause10 Pause 5 PauseDiverter Leak faultAmana dishwasher Facia Control Panel (part number 99002521), the component to check for code 6 Pause 1 Pause (shared reference photo for this part type)6 Pause 1 PauseUser Interface faultAmana dishwasher Valve Inlet (part number W11175771), the component to check for code 8 Pause 1 Pause (shared reference photo for this part type)8 Pause 1 PauseNot Detecting Water faultAmana dishwasher Valve Inlet (part number W11175771), the component to check for code 8 Pause 4 Pause (shared reference photo for this part type)8 Pause 4 PauseWater fill circuit faultAmana dishwasher Valve Inlet (part number W11175771), the component to check for code 8 Pause 5 Pause (shared reference photo for this part type)8 Pause 5 PauseFill Valve Stuck Open faultAmana dishwasher Pump Drain (part number WPW10348269), the component to check for code 9 Pause 1 Pause9 Pause 1 PausePinched fault

Sources

Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.

Applies to models including ADB1200AWS, ADB2200AWS, ADB1200AWB, ADB1200AWW, ADB2200AWW, ADB2500AWW, ADB2200AWB, ADB1500AWW.