Home Fault Codes

Amana Microwave Error Code F2: Meaning and Fix

F2
How F2 appears on a Amana microwave display.
Amana microwave Control Panel Switch (part number 53001491), the component to check for code F2 (shared reference photo for this part type)
Product photo courtesy of AppliancePartsPros.com

Reading the microwave display

On a microwave the code replaces the clock on the display. Unplug the unit for a minute to see if it clears, and note the code before you do. Amana models often flash lights instead of printing text, so count the flashes.

Amana is a Whirlpool Corporation brand sold mostly through builder and value channels. Its entry-level washers, dryers and ranges use the simpler Whirlpool-family control boards, so the codes are short and often shown as flashing lights. The codes apply to model numbers such as ADB1200AWS, ADB2200AWS and NDE2330AYW; check the label on your unit to confirm yours.

What causes F2

How to fix it

  1. Cycle the power: unplug the microwave (or switch off its breaker) for one minute, restore power and test it briefly with a cup of water.
  2. Before opening any panel, switch off the breaker or unplug the appliance; this circuit can carry line voltage.
  3. Disconnect power for the recommended time, then restart and press each key to see if one sticks.
  4. Clean the panel with a barely damp cloth and check around the keys for spills or swelling.
  5. With power off, reseat the ribbon cable or harness between the panel and the main control.
  6. Replace the user interface or touchpad if the code returns, then confirm every key responds.
  7. Run a full short cycle or function again and confirm the code stays gone before putting the appliance back into normal use.

Parts you may need

PartPart no.Buy
Control Panel Switch53001491Find part
Board Control53001081Find part

Part numbers are OEM references; confirm fit by your model number before ordering. Some links are affiliate links; we may earn a commission at no extra cost to you.

Questions

What does F2 mean on a Amana microwave?

It is a fault code from the Amana control. It indicates a problem with the control panel. A power reset is the first thing to try.

Can I keep using the microwave while it shows F2?

You can try it after a power reset. If the code returns, the affected function may not run properly, so it is worth fixing soon before it causes a bigger failure.

Do I need a technician to clear F2?

Many owners can fix it themselves. Start with the reset and the inspection steps, and only call a technician if the part tests bad and you do not want to replace it.

Other Amana microwave codes

Amana microwave Control Panel Switch (part number 53001491), the component to check for code E03E03Control panel faultAmana microwave Fuse (part number WP8183507), the component to check for code E11E11Temperature sensor faultAmana microwave Fuse (part number WP8183507), the component to check for code E12 (shared reference photo for this part type)E12Temperature sensor faultAmana microwave Board Control (part number 53001081), the component to check for code E13E13Control electronics faultAmana microwave Fuse (part number WP8183507), the component to check for code E21 (shared reference photo for this part type)E21Temperature sensor faultAmana microwave Fuse (part number WP8183507), the component to check for code E22 (shared reference photo for this part type)E22Temperature sensor fault

Sources

Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.

Applies to models including AMV5206AAQ, ACO1560AB, AMV5206AAS, AMC5143AAS, AMV5206BAS, AMC2206BAS.