Home Fault Codes

Amana Microwave Error Code F8E5: Meaning and Fix

F8E5
How F8E5 appears on a Amana microwave display.
Amana microwave Motor Convection (part number 52001024), the component to check for code F8E5 (shared reference photo for this part type)
Product photo courtesy of AppliancePartsPros.com

Reading the microwave display

On a microwave the code replaces the clock on the display. Unplug the unit for a minute to see if it clears, and note the code before you do. Amana models often flash lights instead of printing text, so count the flashes.

Amana is a Whirlpool Corporation brand sold mostly through builder and value channels. Its entry-level washers, dryers and ranges use the simpler Whirlpool-family control boards, so the codes are short and often shown as flashing lights. The codes apply to model numbers such as ADB1200AWS, ADB2200AWS and NDE2330AYW; check the label on your unit to confirm yours.

What causes F8E5

How to fix it

  1. Cycle the power: unplug the microwave (or switch off its breaker) for one minute, restore power and test it briefly with a cup of water.
  2. Before opening any panel, switch off the breaker or unplug the appliance; this circuit can carry line voltage.
  3. Switch the unit off, then check the vent or duct run and clear any lint, packing material or blockage.
  4. Remove the fan cover or access panel and make sure the blade turns freely by hand.
  5. Check the fan connector and wiring for burn marks or broken wires.
  6. Run the unit again; if the fan still stalls or never starts, replace the fan motor or blower assembly.
  7. Run a full short cycle or function again and confirm the code stays gone before putting the appliance back into normal use.

Parts you may need

PartPart no.Buy
Motor Convection52001024Find part

Part numbers are OEM references; confirm fit by your model number before ordering. Some links are affiliate links; we may earn a commission at no extra cost to you.

Questions

What does F8E5 mean on a Amana microwave?

It is a fault code from the Amana control. It indicates a problem with the fan or airflow path. A power reset is the first thing to try.

Can I keep using the microwave while it shows F8E5?

You can try it after a power reset. If the code returns, the affected function may not run properly, so it is worth fixing soon before it causes a bigger failure.

Do I need a technician to clear F8E5?

Many owners can fix it themselves. Start with the reset and the inspection steps, and only call a technician if the part tests bad and you do not want to replace it.

Other Amana microwave codes

Amana microwave Control Panel Switch (part number 53001491), the component to check for code E03E03Control panel faultAmana microwave Fuse (part number WP8183507), the component to check for code E11E11Temperature sensor faultAmana microwave Fuse (part number WP8183507), the component to check for code E12 (shared reference photo for this part type)E12Temperature sensor faultAmana microwave Board Control (part number 53001081), the component to check for code E13E13Control electronics faultAmana microwave Fuse (part number WP8183507), the component to check for code E21 (shared reference photo for this part type)E21Temperature sensor faultAmana microwave Fuse (part number WP8183507), the component to check for code E22 (shared reference photo for this part type)E22Temperature sensor fault

Sources

Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.

Applies to models including AMV5206AAQ, ACO1560AB, AMV5206AAS, AMC5143AAS, AMV5206BAS, AMC2206BAS.