Home Fault Codes

Amana Range Error Code 1c1c: Meaning and Fix

1c1c
How 1c1c appears on a Amana range display.
Amana range Control Assembly Lcx (part number W11567368), the component to check for code 1c1c
Product photo courtesy of AppliancePartsPros.com

Reading the range display

On a range or oven the fault appears on the clock or oven display, often with a beep. Press Cancel or Clear once to silence it, and write the code down first. Amana models often flash lights instead of printing text, so count the flashes.

Amana is a Whirlpool Corporation brand sold mostly through builder and value channels. Its entry-level washers, dryers and ranges use the simpler Whirlpool-family control boards, so the codes are short and often shown as flashing lights. The codes apply to model numbers such as ADB1200AWS, ADB2200AWS and NDE2330AYW; check the label on your unit to confirm yours.

What causes 1c1c

How to fix it

  1. Cycle the power: turn the range or oven breaker off for one minute, switch it back on, and run the function that showed the code.
  2. Before opening any panel, switch off the breaker or unplug the appliance; this circuit can carry line voltage.
  3. Disconnect power for the recommended time, then restart and press each key to see if one sticks.
  4. Clean the panel with a barely damp cloth and check around the keys for spills or swelling.
  5. With power off, reseat the ribbon cable or harness between the panel and the main control.
  6. Replace the user interface or touchpad if the code returns, then confirm every key responds.
  7. Run a full short cycle or function again and confirm the code stays gone before putting the appliance back into normal use.

Parts you may need

PartPart no.Buy
Control Assembly LcxW11567368Find part

Part numbers are OEM references; confirm fit by your model number before ordering. Some links are affiliate links; we may earn a commission at no extra cost to you.

Questions

What does 1c1c mean on a Amana range or wall oven?

It is a fault code from the Amana control. It indicates a problem with the control panel. A power reset is the first thing to try.

Can I keep using the range or wall oven while it shows 1c1c?

You can try it after a power reset. If the code returns, the affected function may not run properly, so it is worth fixing soon before it causes a bigger failure.

Do I need a technician to clear 1c1c?

Many owners can fix it themselves. Start with the reset and the inspection steps, and only call a technician if the part tests bad and you do not want to replace it.

Other Amana range codes

Amana range Control Assembly Lcx (part number W11567368), the component to check for code 1c2c (shared reference photo for this part type)1c2cControl panel faultAmana range Oven Temperature Sensor (part number 12001656), the component to check for code 1d111d11Temperature sensor faultAmana range Oven Temperature Sensor (part number 12001656), the component to check for code 1d12 (shared reference photo for this part type)1d12Temperature sensor faultAmana range Oven Temperature Sensor (part number 12001656), the component to check for code 1d21 (shared reference photo for this part type)1d21Temperature sensor faultAmana range Oven Temperature Sensor (part number 12001656), the component to check for code 1d22 (shared reference photo for this part type)1d22Temperature sensor faultAmana range Oven Temperature Sensor (part number 12001656), the component to check for code 3d11 (shared reference photo for this part type)3d11Temperature sensor fault

Sources

Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.

Applies to models including FDU185, AER5715QAW, AER5515QAW, AER5715QAQ, AER5715QAS, AGR5715QDQ, AGR5735QDS, EST307.