Home Fault Codes

Amana Washer Error Code F22: Meaning and Fix

F22
How F22 appears on a Amana washer display.
Amana washer Latch (part number W11307244), the component to check for code F22
Product photo courtesy of AppliancePartsPros.com

Reading the washer display

On a washer the code appears on the digital display or as a pattern of flashing cycle lights. Note it exactly, including any dashes or sub-codes, then unplug the washer for five minutes and run a short drain cycle to see whether it returns. Amana models often flash lights instead of printing text, so count the flashes.

Amana is a Whirlpool Corporation brand sold mostly through builder and value channels. Its entry-level washers, dryers and ranges use the simpler Whirlpool-family control boards, so the codes are short and often shown as flashing lights. The codes apply to model numbers such as ADB1200AWS, ADB2200AWS and NDE2330AYW; check the label on your unit to confirm yours.

What causes F22

How to fix it

  1. Cycle the power: unplug the washer (or switch off its breaker) for five minutes, restore power, then start a short cycle and see whether the code returns.
  2. Open and shut the door or lid firmly and make sure nothing (clothing, a rack, a hose) is blocking the strike.
  3. Look at the lock and strike for cracks, bent tabs or burn marks and compare the action with the door open versus closed.
  4. With power off, reseat the lock connector and check the harness for pinched or green-corroded pins.
  5. If the lock still will not engage or release, replace the lock assembly and re-test.
  6. Run a full short cycle or function again and confirm the code stays gone before putting the appliance back into normal use.

Parts you may need

PartPart no.Buy
LatchW11307244Find part

Part numbers are OEM references; confirm fit by your model number before ordering. Some links are affiliate links; we may earn a commission at no extra cost to you.

Questions

What does F22 mean on a Amana washer?

It is a fault code from the Amana control. It indicates a problem with a door or lid lock. A power reset is the first thing to try.

Can I keep using the washer while it shows F22?

You can try it after a power reset. If the code returns, the affected function may not run properly, so it is worth fixing soon before it causes a bigger failure.

Do I need a technician to clear F22?

Many owners can fix it themselves. Start with the reset and the inspection steps, and only call a technician if the part tests bad and you do not want to replace it.

Other Amana washer codes

Amana washer Cntrl Board Dryer (part number WPW10476828), the component to check for code 1h, 2h, 3h....up to 12h1h, 2h, 3h....up to 12hControl panel faultAmana washer Cntrl Board Dryer (part number WPW10476828), the component to check for code Err (shared reference photo for this part type)ErrControl panel faultAmana washer Pump Assembly (part number WP3363394), the component to check for code F0 E2F0 E2Drain system faultAmana washer Cntrl Board Dryer (part number WPW10476828), the component to check for code F0 E3 (shared reference photo for this part type)F0 E3Control panel faultAmana washer Valve Vac Break (part number WPW10144820), the component to check for code F0 E4F0 E4Water fill circuit faultAmana washer Valve Vac Break (part number WPW10144820), the component to check for code F0 E5 (shared reference photo for this part type)F0 E5Water fill circuit fault

Sources

Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.

Applies to models including NAV5800AWW, NAV2330AWW, NAV2335AWW, NAV5805AWW, NA4521, AWM593W, NAV6800AWW, AWM573W2.