Home Fault Codes

Amana Washer Error Code F8 E2: Meaning and Fix

F8 E2
How F8 E2 appears on a Amana washer display.
Amana washer Timer Invensys Hd (part number WPW10199989), the component to check for code F8 E2
Product photo courtesy of AppliancePartsPros.com

Also shown as: F8E2, F8-E2

Reading the washer display

On a washer the code appears on the digital display or as a pattern of flashing cycle lights. Note it exactly, including any dashes or sub-codes, then unplug the washer for five minutes and run a short drain cycle to see whether it returns. Amana models often flash lights instead of printing text, so count the flashes.

Amana is a Whirlpool Corporation brand sold mostly through builder and value channels. Its entry-level washers, dryers and ranges use the simpler Whirlpool-family control boards, so the codes are short and often shown as flashing lights. The codes apply to model numbers such as ADB1200AWS, ADB2200AWS and NDE2330AYW; check the label on your unit to confirm yours.

What causes F8 E2

How to fix it

  1. Cycle the power: unplug the washer (or switch off its breaker) for five minutes, restore power, then start a short cycle and see whether the code returns.
  2. Check that the freezer and fridge are at their set temperatures and nothing is jamming the ice bin or chute.
  3. Replace the water filter if it is overdue, making sure it locks fully into place.
  4. Inspect the fill tube for ice blockages and thaw it with warm (not hot) water if needed.
  5. Replace the ice maker or dispenser board if the module still does not cycle.
  6. Run a full short cycle or function again and confirm the code stays gone before putting the appliance back into normal use.

Parts you may need

PartPart no.Buy
Timer Invensys HdWPW10199989Find part

Part numbers are OEM references; confirm fit by your model number before ordering. Some links are affiliate links; we may earn a commission at no extra cost to you.

Questions

What does F8 E2 mean on a Amana washer?

It is a fault code from the Amana control. It indicates a problem with the ice or water circuit, specifically the dispenser system. A power reset is the first thing to try.

Can I keep using the washer while it shows F8 E2?

You can try it after a power reset. If the code returns, the affected function may not run properly, so it is worth fixing soon before it causes a bigger failure.

Do I need a technician to clear F8 E2?

Many owners can fix it themselves. Start with the reset and the inspection steps, and only call a technician if the part tests bad and you do not want to replace it.

Other Amana washer codes

Amana washer Cntrl Board Dryer (part number WPW10476828), the component to check for code 1h, 2h, 3h....up to 12h1h, 2h, 3h....up to 12hControl panel faultAmana washer Cntrl Board Dryer (part number WPW10476828), the component to check for code Err (shared reference photo for this part type)ErrControl panel faultAmana washer Pump Assembly (part number WP3363394), the component to check for code F0 E2F0 E2Drain system faultAmana washer Cntrl Board Dryer (part number WPW10476828), the component to check for code F0 E3 (shared reference photo for this part type)F0 E3Control panel faultAmana washer Valve Vac Break (part number WPW10144820), the component to check for code F0 E4F0 E4Water fill circuit faultAmana washer Valve Vac Break (part number WPW10144820), the component to check for code F0 E5 (shared reference photo for this part type)F0 E5Water fill circuit fault

Sources

Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.

Applies to models including NAV5800AWW, NAV2330AWW, NAV2335AWW, NAV5805AWW, NA4521, AWM593W, NAV6800AWW, AWM573W2.