Frigidaire Dryer Error Code E24: Meaning and Fix

On a dryer the code shows in the time-remaining window or as blinking status lights. Write down the characters before you press anything, because starting a new cycle usually clears the display. Frigidaire models show E, F or i codes depending on the appliance.

Frigidaire is an Electrolux brand and shares platforms with the Electrolux line. Washers and dryers use E codes, ranges use F codes, dishwashers use i codes, and refrigerators show SY codes. The codes apply to model numbers such as FGID2466QF, FFBD2412SW and FFRE4120SW; check the label on your unit to confirm yours.

Part numbers are OEM references; confirm fit by your model number before ordering. Some links are affiliate links; we may earn a commission at no extra cost to you.

What does the E24 code mean on a Frigidaire dryer?

The temperature sensor in the exhaust path is reading open or shorted, so the dryer cannot regulate heat.

Can I fix the E24 code myself?

Often yes. The most likely repair is the dryer thermistor, a part most owners can swap with basic hand tools after unplugging the appliance, and it is usually quicker than a service visit.

How do I clear the E24 code?

Unplug the dryer or switch off its breaker for five minutes, then restart a short timed-dry cycle. If E24 comes back, the underlying fault is still there; start with this: thermistor wire loose.

Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.

Applies to models including FFRE4120SW, FGQ2635KW, FFLE3911QW.

• https://www.appliancepartspros.com/frigidaire-thermistor-control-134587700-ap3866842.html
• https://www.appliancepartspros.com/frigidaire-motor.html