KitchenAid Dishwasher Error Code F2E1- Dishwasher: Meaning and Fix
Also shown as: F2E1Dishwasher, F2E1--Dishwasher
Reading the dishwasher display
A dishwasher reports its fault in the display window, or by blinking a cycle light a set number of times with a pause between groups. Count the blinks and pauses before opening the door. KitchenAid pairs the number with a letter group in the manual, so match the exact characters.
KitchenAid is Whirlpool Corporation's premium appliance line. Its dishwashers, ranges, microwaves and refrigerators share Whirlpool boards but use their own panel layouts and numbering in the manuals. The codes apply to model numbers such as KUDS24SEWH1, KUDS01DJSS0 and KHMS155LSS4; check the label on your unit to confirm yours.
What causes F2E1- Dishwasher
- The stuck key oe console (or its connector and wiring) has failed or come loose
- Motor is overloaded by an oversized or unbalanced load
- Drive belt, coupling or transmission is worn or slipping
- Motor control board is failing
- Speed or tachometer feedback is missing, so the control shuts the motor down
- Motor wiring or the harness plug is loose
How to fix it
- Cycle the power: switch off the dishwasher breaker for about a minute (or unplug it if you can reach the cord), restore power and run a short cycle.
- Check the load size and redistribute it so the drum can turn freely; stop and start the cycle again.
- With power off, spin the drum or agitator by hand to feel for binding, a loose belt or a coupling that slips.
- Inspect the motor harness and plugs at both the motor and control board for heat marks or loose pins.
- If the drum turns freely but the motor will not start or runs erratically, replace the motor or the coupling set per the diagnosis.
- Run a full short cycle or function again and confirm the code stays gone before putting the appliance back into normal use.
Parts you may need
| Part | Part no. | Buy |
|---|---|---|
| Pump Drain | WPW10348269 | Find part |
Part numbers are OEM references; confirm fit by your model number before ordering. Some links are affiliate links; we may earn a commission at no extra cost to you.
Questions
What does F2E1- Dishwasher mean on a KitchenAid dishwasher?
It is a fault code from the KitchenAid control. It indicates a problem with the drive system, specifically the stuck key oe console. A power reset is the first thing to try.
Can I keep using the dishwasher while it shows F2E1- Dishwasher?
You can try it after a power reset. If the code returns, the affected function may not run properly, so it is worth fixing soon before it causes a bigger failure.
Do I need a technician to clear F2E1- Dishwasher?
Often yes. Part of this repair means testing live circuits or replacing a control board, so a technician is the safer choice unless you are comfortable with electrical diagnosis.
Other KitchenAid dishwasher codes
Sources
Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.
Applies to models including KUDS24SEWH1, KUDS01DJSS0, KUDS01FLSS6, KUDS01FLSS2, KUDS25SHWH1, KUDS24SEBL1, KUDS01FLSS1, KUDS25SHBL1.