KitchenAid Dishwasher Error Code F9E2: Meaning and Fix
Reading the dishwasher display
A dishwasher reports its fault in the display window, or by blinking a cycle light a set number of times with a pause between groups. Count the blinks and pauses before opening the door. KitchenAid pairs the number with a letter group in the manual, so match the exact characters.
KitchenAid is Whirlpool Corporation's premium appliance line. Its dishwashers, ranges, microwaves and refrigerators share Whirlpool boards but use their own panel layouts and numbering in the manuals. The codes apply to model numbers such as KUDS24SEWH1, KUDS01DJSS0 and KHMS155LSS4; check the label on your unit to confirm yours.
What causes F9E2
- The drain motor (or its connector and wiring) has failed or come loose
- Pump filter or impeller is jammed with lint, coins, glass or debris
- Too much detergent created suds that the pump cannot clear
- Drain hose or standpipe is kinked, clogged or set too high
- Drain pump motor is failing or its wiring is loose
How to fix it
- Cycle the power: switch off the dishwasher breaker for about a minute (or unplug it if you can reach the cord), restore power and run a short cycle.
- Switch the power off and check the drain hose for kinks and make sure the standpipe or disposal knockout is clear.
- Open the pump filter or access panel with a towel and tray ready, and remove anything blocking the pump.
- Run a rinse-and-spin or drain cycle and watch whether water leaves; a humming pump that does not move water points to a seized impeller.
- Replace the drain pump if it is jammed beyond clearing or its motor will not run when power is applied.
- Run a full short cycle or function again and confirm the code stays gone before putting the appliance back into normal use.
Parts you may need
| Part | Part no. | Buy |
|---|---|---|
| Pump Drain | WPW10348269 | Find part |
Part numbers are OEM references; confirm fit by your model number before ordering. Some links are affiliate links; we may earn a commission at no extra cost to you.
Questions
What does F9E2 mean on a KitchenAid dishwasher?
It is a fault code from the KitchenAid control. It indicates a problem with the drain system, specifically the drain motor. A power reset is the first thing to try.
Can I keep using the dishwasher while it shows F9E2?
You can try it after a power reset. If the code returns, the affected function may not run properly, so it is worth fixing soon before it causes a bigger failure.
Do I need a technician to clear F9E2?
Many owners can fix it themselves. Start with the reset and the inspection steps, and only call a technician if the part tests bad and you do not want to replace it.
Other KitchenAid dishwasher codes
Sources
Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.
Applies to models including KUDS24SEWH1, KUDS01DJSS0, KUDS01FLSS6, KUDS01FLSS2, KUDS25SHWH1, KUDS24SEBL1, KUDS01FLSS1, KUDS25SHBL1.