Home Fault Codes

Maytag Dryer Error Code F9 E2: Meaning and Fix

F9 E2
How F9 E2 appears on a Maytag dryer display.
Maytag dryer Timer (part number WPW10185992), the component to check for code F9 E2 (shared reference photo for this part type)
Product photo courtesy of AppliancePartsPros.com

Also shown as: F9E2, F9-E2

Reading the dryer display

On a dryer the code shows in the time-remaining window or as blinking status lights. Write down the characters before you press anything, because starting a new cycle usually clears the display. Maytag shares the Whirlpool pairing: read the first group, then the sub-code that follows it.

Maytag appliances are built by Whirlpool Corporation on shared platforms, which is why Maytag codes often match Whirlpool ones. Maytag washers, dryers and ranges commonly show F-codes with an E sub-code, or flashing keypad lights. The codes apply to model numbers such as MDB7600AWB, MDB7600AWW and PYE2300AYW; check the label on your unit to confirm yours.

What causes F9 E2

How to fix it

  1. Cycle the power: switch off the dryer breaker (or unplug it) for one minute, restore power, then start a timed dry cycle and watch for the code.
  2. Disconnect power for the recommended time, then restart and press each key to see if one sticks.
  3. Clean the panel with a barely damp cloth and check around the keys for spills or swelling.
  4. With power off, reseat the ribbon cable or harness between the panel and the main control.
  5. Replace the user interface or touchpad if the code returns, then confirm every key responds.
  6. Run a full short cycle or function again and confirm the code stays gone before putting the appliance back into normal use.

Parts you may need

PartPart no.Buy
TimerWPW10185992Find part

Part numbers are OEM references; confirm fit by your model number before ordering. Some links are affiliate links; we may earn a commission at no extra cost to you.

Questions

What does F9 E2 mean on a Maytag dryer?

It is a fault code from the Maytag control. It indicates a problem with the control panel. A power reset is the first thing to try.

Can I keep using the dryer while it shows F9 E2?

You can try it after a power reset. If the code returns, the affected function may not run properly, so it is worth fixing soon before it causes a bigger failure.

Do I need a technician to clear F9 E2?

Many owners can fix it themselves. Start with the reset and the inspection steps, and only call a technician if the part tests bad and you do not want to replace it.

Other Maytag dryer codes

Maytag dryer Timer (part number WPW10185992), the component to check for code 0E0EControl electronics faultMaytag dryer Timer (part number WPW10185992), the component to check for code 0g (shared reference photo for this part type)0gControl electronics faultMaytag dryer Timer (part number WPW10185992), the component to check for code 3E (shared reference photo for this part type)3EControl electronics faultMaytag dryer Timer (part number WPW10185992), the component to check for code 6E (shared reference photo for this part type)6EControl electronics faultMaytag dryer Timer (part number WPW10185992), the component to check for code E1 (shared reference photo for this part type)E1Control electronics faultMaytag dryer Timer (part number WPW10185992), the component to check for code E2 (shared reference photo for this part type)E2Control electronics fault

Sources

Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.

Applies to models including PYE2300AYW, MDE5500AYW, MDE4000AYW, MDE3000AYW, MDG5500AWW, PYG2300AWW, SDE515DAYW, SDE305DAYW.