Miele Washer Error Code F16: Meaning and Fix
Reading the washer display
On a washer the code appears on the digital display or as a pattern of flashing cycle lights. Note it exactly, including any dashes or sub-codes, then unplug the washer for five minutes and run a short drain cycle to see whether it returns. Miele displays an F followed by a number and often a text hint in your language.
Miele reports faults as F-numbers on dishwashers and washers and expects many of them to be handled by a service technician. Plenty of the entries here are first checks you can safely do before booking a visit. The codes apply to model numbers such as G 4228 SCU, G 7156 SCVi and W1 Classic WWF060; check the label on your unit to confirm yours.
What causes F16
- A door latch or lock assembly that is worn, broken or not engaging
- Wiring or connector damage between the latch and the control board
- Door lock bimetal or release element failing
- A door switch or strike that is misaligned or has failed
How to fix it
- Open and firmly close the door, checking that nothing (towel, rack, detergent box, clothing) is keeping it from latching.
- Look at the latch hook, strike and door seal for cracks, bent metal or detergent build-up and clean or straighten as needed.
- Press the door shut firmly and listen for a distinct click as the lock engages.
- Switch the power off and inspect the latch connector and harness for loose pins or burn marks.
- Test the door switch or lock for continuity with a multimeter while operating the latch by hand.
- Replace the latch or switch assembly if it fails, then run a short cycle to confirm the door locks and the code clears.
Parts you may need
| Part | Part no. | Buy |
|---|---|---|
| Washer Door Seal | Find part |
Part numbers are OEM references; confirm fit by your model number before ordering. Some links are affiliate links; we may earn a commission at no extra cost to you.
Questions
What does error F16 mean on a Miele washer?
The door status did not agree with the lock state. Exact behavior can vary by model and software version; confirm against your own manual.
Can I keep using my washer while F16 is showing?
No. The machine will refuse to run, and forcing a door interlock is unsafe.
How do I clear F16, and can I fix it myself?
Cancel the program, switch the appliance off and leave it unplugged (or the breaker off) for about five minutes, then restart. The code only stays cleared if the underlying problem is fixed, so work through the steps above. This one is usually a do-it-yourself job with basic tools.
Other Miele washer codes
Sources
Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.
Applies to models including W1 Classic WWF060, WWH860 WCS, WXF660 WCS, WWB020 WCS.