Whirlpool Dishwasher Error Code F2E1- Dishwasher: Meaning and Fix
Also shown as: F2E1Dishwasher, F2E1--Dishwasher
Reading the dishwasher display
A dishwasher reports its fault in the display window, or by blinking a cycle light a set number of times with a pause between groups. Count the blinks and pauses before opening the door. Whirlpool-family codes are usually read as a letter and number pair, with an E sub-code after it.
Whirlpool is the parent platform for Maytag, KitchenAid and Amana, so many of its control boards and fault codes reappear across those brands. Its panels typically report two-part codes such as F5 E2 or flash sequences on the keypad. The codes apply to model numbers such as GU980SCGB2, GU980SCGQ2 and GEW9200LW0; check the label on your unit to confirm yours.
What causes F2E1- Dishwasher
- The stuck key oe console (or its connector and wiring) has failed or come loose
- Motor is overloaded by an oversized or unbalanced load
- Speed or tachometer feedback is missing, so the control shuts the motor down
- Motor control board is failing
- Drive belt, coupling or transmission is worn or slipping
- Motor wiring or the harness plug is loose
How to fix it
- Cycle the power: switch off the dishwasher breaker for about a minute (or unplug it if you can reach the cord), restore power and run a short cycle.
- Check the load size and redistribute it so the drum can turn freely; stop and start the cycle again.
- With power off, spin the drum or agitator by hand to feel for binding, a loose belt or a coupling that slips.
- Inspect the motor harness and plugs at both the motor and control board for heat marks or loose pins.
- If the drum turns freely but the motor will not start or runs erratically, replace the motor or the coupling set per the diagnosis.
- Run a full short cycle or function again and confirm the code stays gone before putting the appliance back into normal use.
Parts you may need
| Part | Part no. | Buy |
|---|---|---|
| Pump Drain | WPW10348269 | Find part |
Part numbers are OEM references; confirm fit by your model number before ordering. Some links are affiliate links; we may earn a commission at no extra cost to you.
Questions
What does F2E1- Dishwasher mean on a Whirlpool dishwasher?
It is a fault code from the Whirlpool control. It indicates a problem with the drive system, specifically the stuck key oe console. A power reset is the first thing to try.
Can I keep using the dishwasher while it shows F2E1- Dishwasher?
You can try it after a power reset. If the code returns, the affected function may not run properly, so it is worth fixing soon before it causes a bigger failure.
Do I need a technician to clear F2E1- Dishwasher?
Often yes. Part of this repair means testing live circuits or replacing a control board, so a technician is the safer choice unless you are comfortable with electrical diagnosis.
Other Whirlpool dishwasher codes
Sources
Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.
Applies to models including GU980SCGB2, GU980SCGQ2, GU980SCGQ3, GU940SCGQ2, GU940SCGB2, DU943PWKQ0, GU1200XTKB0, GU980SCGB3.