Home Fault Codes

Whirlpool Microwave Error Code F2 E5: Meaning and Fix

F2 E5
How F2 E5 appears on a Whirlpool microwave display.
Whirlpool microwave Touch Pad White (part number 4375023), the component to check for code F2 E5 (shared reference photo for this part type)
Product photo courtesy of AppliancePartsPros.com

Also shown as: F2E5, F2-E5

Reading the microwave display

On a microwave the code replaces the clock on the display. Unplug the unit for a minute to see if it clears, and note the code before you do. Whirlpool-family codes are usually read as a letter and number pair, with an E sub-code after it.

Whirlpool is the parent platform for Maytag, KitchenAid and Amana, so many of its control boards and fault codes reappear across those brands. Its panels typically report two-part codes such as F5 E2 or flash sequences on the keypad. The codes apply to model numbers such as GU980SCGB2, GU980SCGQ2 and GEW9200LW0; check the label on your unit to confirm yours.

What causes F2 E5

How to fix it

  1. Cycle the power: unplug the microwave (or switch off its breaker) for one minute, restore power and test it briefly with a cup of water.
  2. Before opening any panel, switch off the breaker or unplug the appliance; this circuit can carry line voltage.
  3. Disconnect power for the recommended time, then restart and press each key to see if one sticks.
  4. Clean the panel with a barely damp cloth and check around the keys for spills or swelling.
  5. With power off, reseat the ribbon cable or harness between the panel and the main control.
  6. Replace the user interface or touchpad if the code returns, then confirm every key responds.
  7. Run a full short cycle or function again and confirm the code stays gone before putting the appliance back into normal use.

Parts you may need

PartPart no.Buy
Touch Pad White4375023Find part
Board Control53001081Find part

Part numbers are OEM references; confirm fit by your model number before ordering. Some links are affiliate links; we may earn a commission at no extra cost to you.

Questions

What does F2 E5 mean on a Whirlpool microwave?

It is a fault code from the Whirlpool control. It indicates a problem with the control panel. A power reset is the first thing to try.

Can I keep using the microwave while it shows F2 E5?

You can try it after a power reset. If the code returns, the affected function may not run properly, so it is worth fixing soon before it causes a bigger failure.

Do I need a technician to clear F2 E5?

Many owners can fix it themselves. Start with the reset and the inspection steps, and only call a technician if the part tests bad and you do not want to replace it.

Other Whirlpool microwave codes

Whirlpool microwave Touch Pad White (part number 4375023), the component to check for code 1c1c1c1cControl panel faultGeneric Whirlpool microwave part photo used as a stand-in; no part-specific photo was available for 1d121d12Temperature sensor faultGeneric Whirlpool microwave part photo used as a stand-in; no part-specific photo was available for 1d211d21Temperature sensor faultWhirlpool microwave Switch (part number W10727360), the component to check for code 4d524d52Door or lid lock faultWhirlpool microwave Switch (part number W10727360), the component to check for code 9d11 (shared reference photo for this part type)9d11Door or lid lock faultWhirlpool microwave Switch (part number W10727360), the component to check for code 9d12 (shared reference photo for this part type)9d12Door or lid lock fault

Sources

Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.

Applies to models including GH5184XPS4, MH1150XMQ0, MH7140XFQ0, MH7140XFB0, MH7140XFQ1, MH7140XFB1, MH1150XMS1, MH1150XMB0.