Home Fault Codes

Whirlpool Microwave Error Code F2H1: Meaning and Fix

F2H1
How F2H1 appears on a Whirlpool microwave display.
Whirlpool microwave Motor Turn (part number WPW10466420), the component to check for code F2H1
Product photo courtesy of AppliancePartsPros.com

Reading the microwave display

On a microwave the code replaces the clock on the display. Unplug the unit for a minute to see if it clears, and note the code before you do. Whirlpool-family codes are usually read as a letter and number pair, with an E sub-code after it.

Whirlpool is the parent platform for Maytag, KitchenAid and Amana, so many of its control boards and fault codes reappear across those brands. Its panels typically report two-part codes such as F5 E2 or flash sequences on the keypad. The codes apply to model numbers such as GU980SCGB2, GU980SCGQ2 and GEW9200LW0; check the label on your unit to confirm yours.

What causes F2H1

How to fix it

  1. Cycle the power: unplug the microwave (or switch off its breaker) for one minute, restore power and test it briefly with a cup of water.
  2. Before opening any panel, switch off the breaker or unplug the appliance; this circuit can carry line voltage.
  3. Switch the unit off, then check the vent or duct run and clear any lint, packing material or blockage.
  4. Remove the fan cover or access panel and make sure the blade turns freely by hand.
  5. Check the fan connector and wiring for burn marks or broken wires.
  6. Run the unit again; if the fan still stalls or never starts, replace the fan motor or blower assembly.
  7. Run a full short cycle or function again and confirm the code stays gone before putting the appliance back into normal use.

Parts you may need

PartPart no.Buy
Motor TurnWPW10466420Find part

Part numbers are OEM references; confirm fit by your model number before ordering. Some links are affiliate links; we may earn a commission at no extra cost to you.

Questions

What does F2H1 mean on a Whirlpool microwave?

It is a fault code from the Whirlpool control. It indicates a problem with the fan or airflow path. A power reset is the first thing to try.

Can I keep using the microwave while it shows F2H1?

You can try it after a power reset. If the code returns, the affected function may not run properly, so it is worth fixing soon before it causes a bigger failure.

Do I need a technician to clear F2H1?

Many owners can fix it themselves. Start with the reset and the inspection steps, and only call a technician if the part tests bad and you do not want to replace it.

Other Whirlpool microwave codes

Whirlpool microwave Touch Pad White (part number 4375023), the component to check for code 1c1c1c1cControl panel faultGeneric Whirlpool microwave part photo used as a stand-in; no part-specific photo was available for 1d121d12Temperature sensor faultGeneric Whirlpool microwave part photo used as a stand-in; no part-specific photo was available for 1d211d21Temperature sensor faultWhirlpool microwave Switch (part number W10727360), the component to check for code 4d524d52Door or lid lock faultWhirlpool microwave Switch (part number W10727360), the component to check for code 9d11 (shared reference photo for this part type)9d11Door or lid lock faultWhirlpool microwave Switch (part number W10727360), the component to check for code 9d12 (shared reference photo for this part type)9d12Door or lid lock fault

Sources

Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.

Applies to models including GH5184XPS4, MH1150XMQ0, MH7140XFQ0, MH7140XFB0, MH7140XFQ1, MH7140XFB1, MH1150XMS1, MH1150XMB0.