Amana Dishwasher Error Code F1E2- Dishwasher: Meaning and Fix

Also shown as: F1E2Dishwasher, F1E2--Dishwasher
Reading the dishwasher display
A dishwasher reports its fault in the display window, or by blinking a cycle light a set number of times with a pause between groups. Count the blinks and pauses before opening the door. Amana models often flash lights instead of printing text, so count the flashes.
Amana is a Whirlpool Corporation brand sold mostly through builder and value channels. Its entry-level washers, dryers and ranges use the simpler Whirlpool-family control boards, so the codes are short and often shown as flashing lights. The codes apply to model numbers such as ADB1200AWS, ADB2200AWS and NDE2330AYW; check the label on your unit to confirm yours.
What causes F1E2- Dishwasher
- The main control communication (or its connector and wiring) has failed or come loose
- Wiring harness between boards is loose, damaged or corroded
- Main control board has a failed relay, driver or memory chip
- A downstream part is drawing too much current and tripping the board
- A brief power surge confused the control
How to fix it
- Cycle the power: switch off the dishwasher breaker for about a minute (or unplug it if you can reach the cord), restore power and run a short cycle.
- Reset power and see whether the code clears; note when it returns (at start, mid-cycle, at random).
- Inspect all harness plugs on the main board for heat discoloration, loose pins or pinched wires.
- Check the wiring diagram for the model and test the circuit named by the code for continuity.
- Replace the main control board only after the harness and the part it drives test good.
- Run a full short cycle or function again and confirm the code stays gone before putting the appliance back into normal use.
Parts you may need
| Part | Part no. | Buy |
|---|---|---|
| Assembly Control Knob | WP9706648 | Find part |
Part numbers are OEM references; confirm fit by your model number before ordering. Some links are affiliate links; we may earn a commission at no extra cost to you.
Questions
What does F1E2- Dishwasher mean on a Amana dishwasher?
It is a fault code from the Amana control. It indicates a problem with the control electronics, specifically the main control communication. A power reset is the first thing to try.
Can I keep using the dishwasher while it shows F1E2- Dishwasher?
You can try it after a power reset. If the code returns, the affected function may not run properly, so it is worth fixing soon before it causes a bigger failure.
Do I need a technician to clear F1E2- Dishwasher?
Often yes. Part of this repair means testing live circuits or replacing a control board, so a technician is the safer choice unless you are comfortable with electrical diagnosis.
Other Amana dishwasher codes
Sources
Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.
Applies to models including ADB1200AWS, ADB2200AWS, ADB1200AWB, ADB1200AWW, ADB2200AWW, ADB2500AWW, ADB2200AWB, ADB1500AWW.

