Amana Dishwasher Error Code FAE4 or F10E4: Meaning and Fix

Also shown as: FAE4orF10E4, FAE4-or-F10E4
Reading the dishwasher display
A dishwasher reports its fault in the display window, or by blinking a cycle light a set number of times with a pause between groups. Count the blinks and pauses before opening the door. Amana models often flash lights instead of printing text, so count the flashes.
Amana is a Whirlpool Corporation brand sold mostly through builder and value channels. Its entry-level washers, dryers and ranges use the simpler Whirlpool-family control boards, so the codes are short and often shown as flashing lights. The codes apply to model numbers such as ADB1200AWS, ADB2200AWS and NDE2330AYW; check the label on your unit to confirm yours.
What causes FAE4 or F10E4
- The diverter valve (or its connector and wiring) has failed or come loose
- Ribbon or harness between the panel and main board is loose
- User interface board is failing
- Moisture or spilled cleaner reached the panel
- A button is stuck or the touchpad membrane is damaged
How to fix it
- Cycle the power: switch off the dishwasher breaker for about a minute (or unplug it if you can reach the cord), restore power and run a short cycle.
- Disconnect power for the recommended time, then restart and press each key to see if one sticks.
- Clean the panel with a barely damp cloth and check around the keys for spills or swelling.
- With power off, reseat the ribbon cable or harness between the panel and the main control.
- Replace the user interface or touchpad if the code returns, then confirm every key responds.
- Run a full short cycle or function again and confirm the code stays gone before putting the appliance back into normal use.
Parts you may need
Questions
What does FAE4 or F10E4 mean on a Amana dishwasher?
It is a fault code from the Amana control. It indicates a problem with the control panel, specifically the diverter valve. A power reset is the first thing to try.
Can I keep using the dishwasher while it shows FAE4 or F10E4?
You can try it after a power reset. If the code returns, the affected function may not run properly, so it is worth fixing soon before it causes a bigger failure.
Do I need a technician to clear FAE4 or F10E4?
Many owners can fix it themselves. Start with the reset and the inspection steps, and only call a technician if the part tests bad and you do not want to replace it.
Other Amana dishwasher codes
Sources
Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.
Applies to models including ADB1200AWS, ADB2200AWS, ADB1200AWB, ADB1200AWW, ADB2200AWW, ADB2500AWW, ADB2200AWB, ADB1500AWW.

