Home Fault Codes

Amana Dryer Error Code F3 E5: Meaning and Fix

F3 E5
How F3 E5 appears on a Amana dryer display.
Amana dryer Wheel (part number WP694089), the component to check for code F3 E5 (shared reference photo for this part type)
Product photo courtesy of AppliancePartsPros.com

Also shown as: F3E5, F3-E5

Reading the dryer display

On a dryer the code shows in the time-remaining window or as blinking status lights. Write down the characters before you press anything, because starting a new cycle usually clears the display. Amana models often flash lights instead of printing text, so count the flashes.

Amana is a Whirlpool Corporation brand sold mostly through builder and value channels. Its entry-level washers, dryers and ranges use the simpler Whirlpool-family control boards, so the codes are short and often shown as flashing lights. The codes apply to model numbers such as ADB1200AWS, ADB2200AWS and NDE2330AYW; check the label on your unit to confirm yours.

What causes F3 E5

How to fix it

  1. Cycle the power: switch off the dryer breaker (or unplug it) for one minute, restore power, then start a timed dry cycle and watch for the code.
  2. Switch the unit off, then check the vent or duct run and clear any lint, packing material or blockage.
  3. Remove the fan cover or access panel and make sure the blade turns freely by hand.
  4. Check the fan connector and wiring for burn marks or broken wires.
  5. Run the unit again; if the fan still stalls or never starts, replace the fan motor or blower assembly.
  6. Run a full short cycle or function again and confirm the code stays gone before putting the appliance back into normal use.

Parts you may need

PartPart no.Buy
WheelWP694089Find part
Wpl Vent KitW10323246Find part

Part numbers are OEM references; confirm fit by your model number before ordering. Some links are affiliate links; we may earn a commission at no extra cost to you.

Questions

What does F3 E5 mean on a Amana dryer?

It is a fault code from the Amana control. It indicates a problem with the fan or airflow path. A power reset is the first thing to try.

Can I keep using the dryer while it shows F3 E5?

You can try it after a power reset. If the code returns, the affected function may not run properly, so it is worth fixing soon before it causes a bigger failure.

Do I need a technician to clear F3 E5?

Many owners can fix it themselves. Start with the reset and the inspection steps, and only call a technician if the part tests bad and you do not want to replace it.

Other Amana dryer codes

Amana dryer Timer (part number W10857612), the component to check for code 0E0EControl electronics faultAmana dryer Timer (part number W10857612), the component to check for code 0g (shared reference photo for this part type)0gControl electronics faultAmana dryer Timer (part number W10857612), the component to check for code 3E (shared reference photo for this part type)3EControl electronics faultAmana dryer Timer (part number W10857612), the component to check for code 6E (shared reference photo for this part type)6EControl electronics faultAmana dryer Timer (part number W10857612), the component to check for code E1 (shared reference photo for this part type)E1Control electronics faultAmana dryer Timer (part number W10857612), the component to check for code E2 (shared reference photo for this part type)E2Control electronics fault

Sources

Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.

Applies to models including NDE2330AYW, NDE2335AYW, NDE7800AYW, NDG2330AWW, NDG7800AWW, NDE5800AYW.