Home Fault Codes

Amana Range Error Code ES or E5: Meaning and Fix

ES or E5
How ES or E5 appears on a Amana range display.
Amana range Fan Blwr (part number W11107275), the component to check for code ES or E5
Product photo courtesy of AppliancePartsPros.com

Also shown as: ESorE5, ES-or-E5

Reading the range display

On a range or oven the fault appears on the clock or oven display, often with a beep. Press Cancel or Clear once to silence it, and write the code down first. Amana models often flash lights instead of printing text, so count the flashes.

Amana is a Whirlpool Corporation brand sold mostly through builder and value channels. Its entry-level washers, dryers and ranges use the simpler Whirlpool-family control boards, so the codes are short and often shown as flashing lights. The codes apply to model numbers such as ADB1200AWS, ADB2200AWS and NDE2330AYW; check the label on your unit to confirm yours.

What causes ES or E5

How to fix it

  1. Cycle the power: turn the range or oven breaker off for one minute, switch it back on, and run the function that showed the code.
  2. Before opening any panel, switch off the breaker or unplug the appliance; this circuit can carry line voltage.
  3. Switch the unit off, then check the vent or duct run and clear any lint, packing material or blockage.
  4. Remove the fan cover or access panel and make sure the blade turns freely by hand.
  5. Check the fan connector and wiring for burn marks or broken wires.
  6. Run the unit again; if the fan still stalls or never starts, replace the fan motor or blower assembly.
  7. Run a full short cycle or function again and confirm the code stays gone before putting the appliance back into normal use.

Parts you may need

PartPart no.Buy
Fan BlwrW11107275Find part

Part numbers are OEM references; confirm fit by your model number before ordering. Some links are affiliate links; we may earn a commission at no extra cost to you.

Questions

What does ES or E5 mean on a Amana range or wall oven?

It is a fault code from the Amana control. It indicates a problem with the fan or airflow path. A power reset is the first thing to try.

Can I keep using the range or wall oven while it shows ES or E5?

You can try it after a power reset. If the code returns, the affected function may not run properly, so it is worth fixing soon before it causes a bigger failure.

Do I need a technician to clear ES or E5?

Many owners can fix it themselves. Start with the reset and the inspection steps, and only call a technician if the part tests bad and you do not want to replace it.

Other Amana range codes

Amana range Control Assembly Lcx (part number W11567368), the component to check for code 1c1c1c1cControl panel faultAmana range Control Assembly Lcx (part number W11567368), the component to check for code 1c2c (shared reference photo for this part type)1c2cControl panel faultAmana range Oven Temperature Sensor (part number 12001656), the component to check for code 1d111d11Temperature sensor faultAmana range Oven Temperature Sensor (part number 12001656), the component to check for code 1d12 (shared reference photo for this part type)1d12Temperature sensor faultAmana range Oven Temperature Sensor (part number 12001656), the component to check for code 1d21 (shared reference photo for this part type)1d21Temperature sensor faultAmana range Oven Temperature Sensor (part number 12001656), the component to check for code 1d22 (shared reference photo for this part type)1d22Temperature sensor fault

Sources

Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.

Applies to models including FDU185, AER5715QAW, AER5515QAW, AER5715QAQ, AER5715QAS, AGR5715QDQ, AGR5735QDS, EST307.