Electrolux Dryer Error Code E24: Meaning and Fix

On a dryer the code shows in the time-remaining window or as blinking status lights. Write down the characters before you press anything, because starting a new cycle usually clears the display. Electrolux uses the same E, F and i prefixes as Frigidaire.

Electrolux builds the platforms behind both its own line and Frigidaire, so its codes line up closely with Frigidaire ones. Look for E codes on laundry, F codes on ranges and i codes on dishwashers. The codes apply to model numbers such as EIDW5905JS, EDSH4944AS and EFME527UIW; check the label on your unit to confirm yours.

Part numbers are OEM references; confirm fit by your model number before ordering. Some links are affiliate links; we may earn a commission at no extra cost to you.

What does the E24 code mean on a Electrolux dryer?

The dryer is tumbling but not heating properly.

Can I fix the E24 code myself?

Start with the free checks (power reset, connectors, obvious blockages). The likely repair involves the dryer heating element and live-circuit testing, so if the code returns, a qualified technician is the safer call.

How do I clear the E24 code?

Unplug the dryer or switch off its breaker for five minutes, then restart a short timed-dry cycle. If E24 comes back, the underlying fault is still there; start with this: open heating element.

Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.

Applies to models including EFME527UIW, EFMC427UIW, EFLE527UIW.

• https://www.appliancepartspros.com/frigidaire-dryer-heater-assembly-131475320-ap4501537.html
• https://www.appliancepartspros.com/frigidaire-motor.html