Frigidaire Range Error Code F5: Meaning and Fix

On a range or oven the fault appears on the clock or oven display, often with a beep. Press Cancel or Clear once to silence it, and write the code down first. Frigidaire models show E, F or i codes depending on the appliance.

Frigidaire is an Electrolux brand and shares platforms with the Electrolux line. Washers and dryers use E codes, ranges use F codes, dishwashers use i codes, and refrigerators show SY codes. The codes apply to model numbers such as FGID2466QF, FFBD2412SW and FFRE4120SW; check the label on your unit to confirm yours.

Part numbers are OEM references; confirm fit by your model number before ordering. Some links are affiliate links; we may earn a commission at no extra cost to you.

What does the F5 code mean on a Frigidaire range?

The control found a problem in its internal logic or a relay drive circuit.

Can I fix the F5 code myself?

Start with the free checks (power reset, connectors, obvious blockages). The likely repair involves the oven control board and live-circuit testing, so if the code returns, a qualified technician is the safer call.

How do I clear the F5 code?

Press Clear/Off, then cut power to the oven at the breaker for five minutes before restoring it. If F5 comes back, the underlying fault is still there; start with this: failed oven control.

Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.

Applies to models including FFEF3054TS, FFGH3054US, FCRE3052AS, FGEF3036TF.

• https://www.appliancepartspros.com/frigidaire-board-316442119-ap4362611.html
• https://www.appliancepartspros.com/repair-help/frigidaire-fault-codes.html