Frigidaire Range Error Code F6: Meaning and Fix

How F6 appears on a Frigidaire range display.

Frigidaire range F6: example oven control board (part 316442119), representative part photo for this code — AppliancePartsPros.com product photo, part 316442119

Reading the range display

On a range or oven the fault appears on the clock or oven display, often with a beep. Press Cancel or Clear once to silence it, and write the code down first. Frigidaire models show E, F or i codes depending on the appliance.

Frigidaire is an Electrolux brand and shares platforms with the Electrolux line. Washers and dryers use E codes, ranges use F codes, dishwashers use i codes, and refrigerators show SY codes. The codes apply to model numbers such as FGID2466QF, FFBD2412SW and FFRE4120SW; check the label on your unit to confirm yours.

What causes F6

Failed oven control
Loose connector
Failed relay circuit

How to fix it

Cycle power at the breaker.
Inspect the connectors at the control.
Replace the oven control.
Run a bake cycle to verify.

Parts you may need

Part	Part no.	Buy
Oven control board	316442119	Find part

Part numbers are OEM references; confirm fit by your model number before ordering. Some links are affiliate links; we may earn a commission at no extra cost to you.

Questions

What does the F6 code mean on a Frigidaire range?

Another control board fault code in the same group as F0, F1 and F5.

Can I fix the F6 code myself?

Start with the free checks (power reset, connectors, obvious blockages). The likely repair involves the oven control board and live-circuit testing, so if the code returns, a qualified technician is the safer call.

How do I clear the F6 code?

Press Clear/Off, then cut power to the oven at the breaker for five minutes before restoring it. If F6 comes back, the underlying fault is still there; start with this: failed oven control.

Other Frigidaire range codes

Frigidaire range F0: example oven control board (part 316442119), representative part photo for this code

F0Electronic oven control failure

Frigidaire range F1: example oven control board (part 316442119), representative part photo for this code

F1Electronic oven control failure

Frigidaire range F2: example oven temperature sensor (part 316217002), representative part photo for this code

F2Oven too hot

Frigidaire range F3: example oven temperature sensor (part 316217002), representative part photo for this code

F3Open oven temperature sensor

Frigidaire range F4: example oven temperature sensor (part 316217002), representative part photo for this code

F4Shorted oven temperature sensor

Frigidaire range F5: example oven control board (part 316442119), representative part photo for this code

F5Electronic oven control failure

Sources

Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.

Applies to models including FFEF3054TS, FFGH3054US, FCRE3052AS, FGEF3036TF.