GE Washer Error Code E22: Meaning and Fix

How E22 appears on a GE washer display.

GE washer E22: example water inlet valve (part WH13X10023), representative part photo for this code — AppliancePartsPros.com product photo, part WH13X10023

Reading the washer display

On a washer the code appears on the digital display or as a pattern of flashing cycle lights. Note it exactly, including any dashes or sub-codes, then unplug the washer for five minutes and run a short drain cycle to see whether it returns. GE writes letters and numbers together with no space, so E22 is one code, not E2 and 2.

GE Appliances, now owned by Haier, mixes legacy GE boards with newer connected platforms. Washers and dryers tend to use E or D codes, ranges and microwaves use F codes, and refrigerators show Er codes. The codes apply to model numbers such as GDF630PSMSS, GDT665SSNSS and GTD65EBSJ0WS; check the label on your unit to confirm yours.

What causes E22

Pressure hose pinched or loose
Low water pressure
Failing level sensor

How to fix it

Check both faucets are fully open.
Inspect the plastic pressure hose from tub to sensor for kinks or water.
Clean inlet screens.
Replace the pressure sensor or inlet valve if the code returns.

Parts you may need

Part	Part no.	Buy
Water inlet valve	WH13X10023	Find part

Part numbers are OEM references; confirm fit by your model number before ordering. Some links are affiliate links; we may earn a commission at no extra cost to you.

Questions

What does the E22 code mean on a GE washer?

The washer could not confirm the water level it expected during fill or rinse. The level sensor circuit or the fill itself is suspect.

Can I fix the E22 code myself?

Often yes. The most likely repair is the water inlet valve, a part most owners can swap with basic hand tools after unplugging the appliance, and it is usually quicker than a service visit.

How do I clear the E22 code?

Unplug the washer (or switch off its breaker) for five minutes, then plug it back in and run a short rinse or drain cycle. If E22 comes back, the underlying fault is still there; start with this: pressure hose pinched or loose.

Other GE washer codes

GE washer E23: example door lock assembly (part WE1M1011), representative part photo for this code

E23Door lock error

GE washer E24: example drain pump (part WH23X10028), representative part photo for this code

E24Drain error

GE washer E31: example main control board (part WR55X10560), representative part photo for this code

E31Water level sensor fault

GE washer E41: example door lock assembly (part WE1M1011), representative part photo for this code

E41Door not closed / lock open

GE washer E42: example door lock assembly (part WE1M1011), representative part photo for this code

E42Door lock failure

GE washer E43: example door lock assembly (part WE1M1011), representative part photo for this code

E43Door lock switch fault

Sources

Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.

Applies to models including GFW850SPNRS, GFW550SSMWW, GTW680BSJWS, WCVH6260KWW.