GE Washer Error Code E24: Meaning and Fix

How E24 appears on a GE washer display.

GE washer E24: example drain pump (part WH23X10028), representative part photo for this code — AppliancePartsPros.com product photo, part WH23X10028

Reading the washer display

On a washer the code appears on the digital display or as a pattern of flashing cycle lights. Note it exactly, including any dashes or sub-codes, then unplug the washer for five minutes and run a short drain cycle to see whether it returns. GE writes letters and numbers together with no space, so E22 is one code, not E2 and 2.

GE Appliances, now owned by Haier, mixes legacy GE boards with newer connected platforms. Washers and dryers tend to use E or D codes, ranges and microwaves use F codes, and refrigerators show Er codes. The codes apply to model numbers such as GDF630PSMSS, GDT665SSNSS and GTD65EBSJ0WS; check the label on your unit to confirm yours.

What causes E24

Clogged pump filter
Failed drain pump
Kinked drain hose

How to fix it

Open the pump filter at the front lower panel and clean it out.
Check the drain hose and standpipe.
Run a drain/spin cycle.
Replace the pump if it does not run.

Parts you may need

Part	Part no.	Buy
Drain pump	WH23X10028	Find part

Part numbers are OEM references; confirm fit by your model number before ordering. Some links are affiliate links; we may earn a commission at no extra cost to you.

Questions

What does the E24 code mean on a GE washer?

Water did not leave the tub fast enough, so the washer stopped.

Can I fix the E24 code myself?

Often yes. The most likely repair is the drain pump, a part most owners can swap with basic hand tools after unplugging the appliance, and it is usually quicker than a service visit.

How do I clear the E24 code?

Unplug the washer (or switch off its breaker) for five minutes, then plug it back in and run a short rinse or drain cycle. If E24 comes back, the underlying fault is still there; start with this: clogged pump filter.

Other GE washer codes

GE washer E22: example water inlet valve (part WH13X10023), representative part photo for this code

E22Water level sensor / fill error

GE washer E23: example door lock assembly (part WE1M1011), representative part photo for this code

E23Door lock error

GE washer E31: example main control board (part WR55X10560), representative part photo for this code

E31Water level sensor fault

GE washer E41: example door lock assembly (part WE1M1011), representative part photo for this code

E41Door not closed / lock open

GE washer E42: example door lock assembly (part WE1M1011), representative part photo for this code

E42Door lock failure

GE washer E43: example door lock assembly (part WE1M1011), representative part photo for this code

E43Door lock switch fault

Sources

Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.

Applies to models including GFW850SPNRS, GFW550SSMWW, GTW680BSJWS, WCVH6260KWW.