Home Fault Codes

Genie Opener Error Code Green LED 1 blink: Meaning and Fix

Green LED 1 blink
How Green LED 1 blink appears on a Genie opener display.
Genie opener code Green LED 1 blink: Safe-T-Beam sensor
Genie Company product image, store.geniecompany.com

Also shown as: Old Genie green 1 blink, Green blinks once

Reading the opener display

A garage door opener reports faults through blinking LEDs on the motor head, a diagnostic window on the logic board, or the wall control. Count the flashes slowly and repeat the count before you decide what you saw. Genie counts blinks on its LEDs; the number of blinks, not their speed, identifies the fault.

Genie, from The Overhead Door Corporation, signals faults by blinking LEDs on the motor head and by wall-console diagnostics. Genie blink counts differ from LiftMaster, so do not use a LiftMaster chart for a Genie opener. The codes apply to model numbers such as H8000 and ISD990; check the label on your unit to confirm yours.

What causes Green LED 1 blink

How to fix it

  1. Set the limits.
  2. Clear the beam.
  3. Check the spring and track.
  4. Retest.

Parts you may need

PartPart no.Buy
Safe-T-Beam sensors37220RFind part

Part numbers are OEM references; confirm fit by your model number before ordering. Some links are affiliate links; we may earn a commission at no extra cost to you.

Questions

What does one green blink mean?

Incomplete limits or obstruction.

Spring?

Check it.

Beam?

Clear it.

Other Genie opener codes

Genie opener code 1 blink: motor drive board1 blinkMotor drive board interruptGenie opener code 2 blinks: controller board2 blinksController board interruptGenie opener code 3 blinks: motor assembly3 blinksOpener overheated or over-cycledGenie opener code 4 blinks: opener4 blinksForce settings incorrectGenie opener code 5 blinks: Safe-T-Beam sensor5 blinksSafe-T-Beam malfunctionGenie opener code 6 blinks: wall console6 blinksWall console does not work

Sources

Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.

Applies to models including H8000, ISD990, ISD995, ISD1000, PRO99, CMD9900, 1022, 1024.