Kenmore Dryer Error Code d80: Meaning and Fix
Also shown as: d90
Reading the dryer display
On a dryer the code shows in the time-remaining window or as blinking status lights. Write down the characters before you press anything, because starting a new cycle usually clears the display. Check the model-number prefix first: the same Kenmore code can mean different things depending on the manufacturer.
Kenmore is a private label, and the factory that built your unit decides which fault codes it shows. The first digits of a Kenmore model number (110, 417, 665, 795, 796 and so on) tell you whether Whirlpool, LG, Electrolux or Frigidaire made it. Check the model label on your unit before using any chart.
What causes d80
- A lint-clogged vent duct or exhaust hood
- A crushed or overly long dryer vent run
- A blocked lint screen or lint trap housing
- Vent too long for the run
How to fix it
- Unplug the dryer and clean the lint screen and the housing underneath it.
- Pull the dryer forward, disconnect the vent hose and clear lint from the hose, wall duct and exterior flap.
- Shorten or straighten the vent duct.
- Check the vent is rigid or semi-rigid metal, short, and free of sags and kinks.
- Clean out the blower housing if you can access it, then reconnect the duct.
- Run a timed dry and confirm hot air flows freely at the outside vent.
Parts you may need
| Part | Part no. | Buy |
|---|---|---|
| Dryer Thermal Fuse | WP3392519 | Find part |
Part numbers are OEM references; confirm fit by your model number before ordering. Some links are affiliate links; we may earn a commission at no extra cost to you.
Questions
What does error d80 mean on a Kenmore dryer?
The dryer detects that exhaust airflow is restricted. Kenmore sells units built by several manufacturers, so the code table that applies depends on who made your model; use the model number to confirm.
Can I keep using my dryer while d80 is showing?
Stop using it until the vent is clear; restricted airflow overheats the dryer and is a real fire risk.
How do I clear d80, and can I fix it myself?
Cancel the program, switch the appliance off and leave it unplugged (or the breaker off) for about five minutes, then restart. The code only stays cleared if the underlying problem is fixed, so work through the steps above. This one is usually a do-it-yourself job with basic tools.
Other Kenmore dryer codes
Sources
Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.
Applies to models including Kenmore Elite 796 series (LG-built), Kenmore 110 series (Whirlpool-built), Kenmore 417 series (Frigidaire-built).