LG Range Error Code F4: Meaning and Fix

Also shown as: F5
Reading the range display
On a range or oven the fault appears on the clock or oven display, often with a beep. Press Cancel or Clear once to silence it, and write the code down first. LG codes are short letter pairs; a capital O differs from a zero.
LG appliances show short alphabetic codes (OE, IE, UE on washers, Er plus letters on refrigerators) and, on ThinQ models, a Smart Diagnosis option. LG also builds many Kenmore Elite units. The codes apply to model numbers such as LDF7774ST, LDT5678SS and DLEX3900B; check the label on your unit to confirm yours.
What causes F4
- Failed lower oven probe
- Loose connector
- Wiring fault
- Control board fault
How to fix it
- Press CLEAR/OFF and try the original function again.
- If the code comes back, turn the range's circuit breaker off, wait 30 seconds, and switch it back on.
- Check the lower oven probe and its connector for damage.
- Run the function once more and watch whether the code returns.
- If the code persists or you cannot perform the check, schedule a repair; most of these faults need a technician.
Parts you may need
| Part | Part no. | Buy |
|---|---|---|
| Oven temperature sensor | EBG61305805 | Find part |
Part numbers are OEM references; confirm fit by your model number before ordering. Some links are affiliate links; we may earn a commission at no extra cost to you.
Questions
Is F4 only on double ovens?
Yes, it applies to the lower cavity.
Does F5 differ?
LG lists F5 with the same meaning.
Is this safe to ignore?
No; the oven cannot regulate heat.
Other LG range codes
Sources
Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.
Applies to models including LRE3061ST, LSGL6335F, LSEL6333F, LRG3061ST, LTE4815ST.





