Samsung Dishwasher Error Code CE: Meaning and Fix
Reading the dishwasher display
A dishwasher reports its fault in the display window, or by blinking a cycle light a set number of times with a pause between groups. Count the blinks and pauses before opening the door. Samsung codes combine a digit with a letter, and some alternate with the cycle time.
Samsung displays numeric-plus-letter codes such as 4C, 5E or 21E, and many models run a Smart Care self-check through the app. Washers and dryers often use letter pairs, refrigerators use number plus E. The codes apply to model numbers such as DW80R5061US, DW80K7050US and DV45T6000EW; check the label on your unit to confirm yours.
What causes CE
- Loose or damaged internal harness
- Power glitch that interrupted the boards
- Failing main or display board
How to fix it
- Turn the dishwasher off, wait a minute and restart a cycle.
- Cut power at the breaker for several minutes to fully reset.
- Check the harness plugs between the display and main board.
- Replace the board that does not respond.
Parts you may need
| Part | Part no. | Buy |
|---|---|---|
| Dishwasher Main Control Board | DD92-00033C | Find part |
Part numbers are OEM references; confirm fit by your model number before ordering. Some links are affiliate links; we may earn a commission at no extra cost to you.
Questions
Is CE a Wi-Fi problem?
No, it is communication between internal boards.
Can a reset fix it?
Yes if it was a one-off glitch.
When is service needed?
When the code returns after a full power reset.
Other Samsung dishwasher codes
Sources
Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.
Applies to models including DW80R5061US, DW80K7050US, DW80J3020US, DW80N3030US, DW80R9950US.