Samsung Dishwasher Error Code PE: Meaning and Fix

Reading the dishwasher display
A dishwasher reports its fault in the display window, or by blinking a cycle light a set number of times with a pause between groups. Count the blinks and pauses before opening the door. Samsung codes combine a digit with a letter, and some alternate with the cycle time.
Samsung displays numeric-plus-letter codes such as 4C, 5E or 21E, and many models run a Smart Care self-check through the app. Washers and dryers often use letter pairs, refrigerators use number plus E. The codes apply to model numbers such as DW80R5061US, DW80K7050US and DV45T6000EW; check the label on your unit to confirm yours.
What causes PE
- Diverter fault
- Spray arm assembly problem
- Wiring or board fault
How to fix it
- Empty the dishwasher.
- Add detergent and run a half-load cycle.
- Check the spray assembly for debris.
- Have the diverter checked if the code repeats.
Parts you may need
| Part | Part no. | Buy |
|---|---|---|
| Dishwasher Middle Spray Nozzle Assembly | DD82-01113A | Find part |
Part numbers are OEM references; confirm fit by your model number before ordering. Some links are affiliate links; we may earn a commission at no extra cost to you.
Questions
What is half load?
A reduced spray mode for small loads.
Is it serious?
Usually not; full loads may still wash.
Fix?
Restart first, service if it repeats.
Other Samsung dishwasher codes
Sources
Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.
Applies to models including DW80R5061US, DW80K7050US, DW80J3020US, DW80N3030US, DW80R9950US.





