Samsung Dishwasher Error Code tE: Meaning and Fix
Reading the dishwasher display
A dishwasher reports its fault in the display window, or by blinking a cycle light a set number of times with a pause between groups. Count the blinks and pauses before opening the door. Samsung codes combine a digit with a letter, and some alternate with the cycle time.
Samsung displays numeric-plus-letter codes such as 4C, 5E or 21E, and many models run a Smart Care self-check through the app. Washers and dryers often use letter pairs, refrigerators use number plus E. The codes apply to model numbers such as DW80R5061US, DW80K7050US and DV45T6000EW; check the label on your unit to confirm yours.
What causes tE
- Thermistor fault
- Loose wiring
- Control board fault
How to fix it
- Empty the dishwasher.
- Add detergent and run a Normal cycle.
- Check the sensor connector.
- Replace the thermistor or heater assembly.
Parts you may need
| Part | Part no. | Buy |
|---|---|---|
| Dishwasher Heater Assembly | DD47-00008A | Find part |
Part numbers are OEM references; confirm fit by your model number before ordering. Some links are affiliate links; we may earn a commission at no extra cost to you.
Questions
tE vs HE?
Both involve temperature sensing.
Can I fix it myself?
If you are comfortable with a multimeter, yes.
Is it urgent?
Not dangerous, but cycles may stop.
Other Samsung dishwasher codes
Sources
Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.
Applies to models including DW80R5061US, DW80K7050US, DW80J3020US, DW80N3030US, DW80R9950US.