Samsung Refrigerator Error Code 8E: Meaning and Fix

Also shown as: 8C
Reading the refrigerator display
On a refrigerator the code shows on the control panel or dispenser display. Some models flash a letter or alternate two characters; hold the code in view and note both. Samsung codes combine a digit with a letter, and some alternate with the cycle time.
Samsung displays numeric-plus-letter codes such as 4C, 5E or 21E, and many models run a Smart Care self-check through the app. Washers and dryers often use letter pairs, refrigerators use number plus E. The codes apply to model numbers such as DW80R5061US, DW80K7050US and DV45T6000EW; check the label on your unit to confirm yours.
What causes 8E
- Sensor failure
- Ice maker assembly fault
- Loose connector
How to fix it
- Unplug the refrigerator for a few minutes.
- Remove the ice bin and inspect the ice maker.
- Check the connector and wire at the ice maker.
- Replace the ice maker or sensor.
Parts you may need
Questions
Does 8E stop ice?
Often yes.
Is the fridge section affected?
Usually not.
Is it DIY?
Yes on most models.
Other Samsung refrigerator codes
Sources
Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.
Applies to models including RF28R7551SR, RF28R6201SR, RF23J9011SR, RS27T5200SR, RF263BEAESR, RT18M6215SR.





