Craftsman Opener Error Code 1-5: Meaning and Fix
Also shown as: 15, Up 1 Down 5
Reading the opener display
A garage door opener reports faults through blinking LEDs on the motor head, a diagnostic window on the logic board, or the wall control. Count the flashes slowly and repeat the count before you decide what you saw. Craftsman openers follow the Chamberlain flash chart.
Craftsman garage door openers are made by the Chamberlain Group under license, so they share the LiftMaster and Chamberlain diagnostic codes. Look for a model number starting with 139. on the label. Check the model label on your unit before using any chart.
What causes 1-5
- A door that is binding or a spring that has broken so the motor cannot turn
- A failed RPM sensor or travel module
- A trolley caught on a stop or a worn drive gear
- A loose or damaged travel module cable
How to fix it
- Pull the emergency release and move the door by hand; it should travel smoothly.
- Fix any binding, bent track or broken spring first (spring work is a pro task).
- Reseat the travel module cable at the board and module.
- Unplug the opener for 30 seconds and retest.
- Replace the travel module if the code returns with a free-moving door.
Parts you may need
Questions
What does 1-5 mean on a Craftsman opener?
The motor movement sensor is not reporting, often due to a stuck door or a bad travel module.
Can a broken spring cause 1-5?
Yes, because the motor cannot turn a door it cannot lift.
Is it expensive?
A travel module kit is a moderate part; labor depends on the model.
Other Craftsman opener codes
Sources
Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.