Electrolux Dishwasher Error Code E24: Meaning and Fix

A dishwasher reports its fault in the display window, or by blinking a cycle light a set number of times with a pause between groups. Count the blinks and pauses before opening the door. Electrolux uses the same E, F and i prefixes as Frigidaire.

Electrolux builds the platforms behind both its own line and Frigidaire, so its codes line up closely with Frigidaire ones. Look for E codes on laundry, F codes on ranges and i codes on dishwashers. The codes apply to model numbers such as EIDW5905JS, EDSH4944AS and EFME527UIW; check the label on your unit to confirm yours.

Part numbers are OEM references; confirm fit by your model number before ordering. Some links are affiliate links; we may earn a commission at no extra cost to you.

What does the E24 code mean on a Electrolux dishwasher?

The pump could not clear the tub.

Can I fix the E24 code myself?

Often yes. The most likely repair is the drain / circulation pump, a part most owners can swap with basic hand tools after unplugging the appliance, and it is usually quicker than a service visit.

How do I clear the E24 code?

Switch off the dishwasher breaker or hold Cancel/Drain, wait a few minutes and run a short rinse. If E24 comes back, the underlying fault is still there; start with this: blocked filter.

Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.

Applies to models including EIDW5905JS, EDSH4944AS, EIDW6105GS.

• https://www.appliancepartspros.com/frigidaire-pump-5304483444-ap5270644.html
• https://www.appliancepartspros.com/frigidaire-pump.html