Home Fault Codes

Electrolux Dishwasher Error Code i10: Meaning and Fix

i10
How i10 appears on a Electrolux dishwasher display.
Electrolux dishwasher i10: example water inlet valve (part 5304525044), representative part photo for this code
AppliancePartsPros.com product photo, part 5304525044

Reading the dishwasher display

A dishwasher reports its fault in the display window, or by blinking a cycle light a set number of times with a pause between groups. Count the blinks and pauses before opening the door. Electrolux uses the same E, F and i prefixes as Frigidaire.

Electrolux builds the platforms behind both its own line and Frigidaire, so its codes line up closely with Frigidaire ones. Look for E codes on laundry, F codes on ranges and i codes on dishwashers. The codes apply to model numbers such as EIDW5905JS, EDSH4944AS and EFME527UIW; check the label on your unit to confirm yours.

What causes i10

How to fix it

  1. Open the supply valve under the sink.
  2. Disconnect the inlet and clean the screen.
  3. Check the float moves freely.
  4. Replace the inlet valve if it does not pass water.

Parts you may need

PartPart no.Buy
Water inlet valve5304525044Find part

Part numbers are OEM references; confirm fit by your model number before ordering. Some links are affiliate links; we may earn a commission at no extra cost to you.

Questions

What does the i10 code mean on a Electrolux dishwasher?

The dishwasher did not detect enough water entering within the allowed time.

Can I fix the i10 code myself?

Often yes. The most likely repair is the water inlet valve, a part most owners can swap with basic hand tools after unplugging the appliance, and it is usually quicker than a service visit.

How do I clear the i10 code?

Switch off the dishwasher breaker or hold Cancel/Drain, wait a few minutes and run a short rinse. If i10 comes back, the underlying fault is still there; start with this: shutoff valve closed.

Other Electrolux dishwasher codes

Electrolux dishwasher i20: example drain / circulation pump (part 5304483444), representative part photo for this codei20Drain problemElectrolux dishwasher i30: example water inlet valve (part 5304525044), representative part photo for this codei30Leak or overflowElectrolux dishwasher E15: example door gasket / seal (part 5304500204), representative part photo for this codeE15Water in base panElectrolux dishwasher E24: example drain / circulation pump (part 5304483444), representative part photo for this codeE24Drain faultElectrolux dishwasher E22: example drain / circulation pump (part 5304483444), representative part photo for this codeE22Filter clogged

Sources

Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.

Applies to models including EIDW5905JS, EDSH4944AS, EIDW6105GS.