Electrolux Range Error Code F13: Meaning and Fix

On a range or oven the fault appears on the clock or oven display, often with a beep. Press Cancel or Clear once to silence it, and write the code down first. Electrolux uses the same E, F and i prefixes as Frigidaire.

Electrolux builds the platforms behind both its own line and Frigidaire, so its codes line up closely with Frigidaire ones. Look for E codes on laundry, F codes on ranges and i codes on dishwashers. The codes apply to model numbers such as EIDW5905JS, EDSH4944AS and EFME527UIW; check the label on your unit to confirm yours.

Part numbers are OEM references; confirm fit by your model number before ordering. Some links are affiliate links; we may earn a commission at no extra cost to you.

What does the F13 code mean on a Electrolux range?

The oven sensor circuit reads open.

Can I fix the F13 code myself?

Often yes. The most likely repair is the oven temperature sensor, a part most owners can swap with basic hand tools after unplugging the appliance, and it is usually quicker than a service visit.

How do I clear the F13 code?

Press Clear/Off, then cut power to the oven at the breaker for five minutes before restoring it. If F13 comes back, the underlying fault is still there; start with this: loose connector.

Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.

Applies to models including EI30EF40QS, EI30GF35JS, EW30EC55GS.

• https://www.appliancepartspros.com/frigidaire-probe-oven-temp-316217002-ap3363354.html
• https://www.appliancepartspros.com/frigidaire-motor.html