Speed Queen Washer Error Code EF: Meaning and Fix
Also shown as: Ef
Reading the washer display
On a washer the code appears on the digital display or as a pattern of flashing cycle lights. Note it exactly, including any dashes or sub-codes, then unplug the washer for five minutes and run a short drain cycle to see whether it returns. Speed Queen shows two characters such as Ed or E1 on the control.
Speed Queen, from Alliance Laundry Systems, builds commercial-grade home laundry. Its washers and dryers use short error codes such as E1 or Ed, and the control is simpler than most consumer brands, which makes diagnosis more direct. The codes apply to model numbers such as DR7, DC5 and TR7; check the label on your unit to confirm yours.
What causes EF
- Low household water pressure or a half-closed shutoff valve
- Closed or restricted supply valves
- A clogged mesh screen on the inlet valve or a kinked fill hose
- A failing inlet valve solenoid that opens slowly, sticks open or does not open at all
How to fix it
- Cancel the cycle and make sure the hot and cold supply valves behind the machine are fully open.
- Turn off the water, disconnect the fill hose and rinse the small filter screen at the valve inlet to clear sediment.
- Open both taps and clear inlet screens.
- Inspect the hose for kinks and test another faucet in the home to confirm pressure is normal.
- Reconnect, restore power and start a short cycle while listening for the valve clicking and water running in.
- If water still fails to arrive (or never stops), measure the valve coil with a multimeter and replace the inlet valve if it is out of range.
Parts you may need
| Part | Part no. | Buy |
|---|---|---|
| Washer Water Inlet Valve | 205765 | Find part |
Part numbers are OEM references; confirm fit by your model number before ordering. Some links are affiliate links; we may earn a commission at no extra cost to you.
Questions
What does error EF mean on a Speed Queen washer?
The tub did not fill within the allowed time. Exact behavior can vary by model and software version; confirm against your own manual.
Can I keep using my washer while EF is showing?
Only briefly. A machine that cannot fill correctly will wash poorly and, if the valve sticks open, can overflow, so shut the water off at the wall when it is idle.
How do I clear EF, and can I fix it myself?
Cancel the program, switch the appliance off and leave it unplugged (or the breaker off) for about five minutes, then restart. The code only stays cleared if the underlying problem is fixed, so work through the steps above. This one is usually a do-it-yourself job with basic tools.
Other Speed Queen washer codes
Sources
Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.
Applies to models including TR7, TC5, FF7, LWNA52, AWNE92.