Electrolux Washer Error Code E45: Meaning and Fix

On a washer the code appears on the digital display or as a pattern of flashing cycle lights. Note it exactly, including any dashes or sub-codes, then unplug the washer for five minutes and run a short drain cycle to see whether it returns. Electrolux uses the same E, F and i prefixes as Frigidaire.

Electrolux builds the platforms behind both its own line and Frigidaire, so its codes line up closely with Frigidaire ones. Look for E codes on laundry, F codes on ranges and i codes on dishwashers. The codes apply to model numbers such as EIDW5905JS, EDSH4944AS and EFME527UIW; check the label on your unit to confirm yours.

Part numbers are OEM references; confirm fit by your model number before ordering. Some links are affiliate links; we may earn a commission at no extra cost to you.

What does the E45 code mean on a Electrolux washer?

The motor did not respond to the board commands. Wiring or motor failure is typical.

Can I fix the E45 code myself?

Start with the free checks (power reset, connectors, obvious blockages). The likely repair involves the washer drive motor and live-circuit testing, so if the code returns, a qualified technician is the safer call.

How do I clear the E45 code?

Unplug the washer (or switch off its breaker) for five minutes, then plug it back in and run a short rinse or drain cycle. If E45 comes back, the underlying fault is still there; start with this: loose motor harness.

Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.

Applies to models including EFLS527UIW, EFLW427UIW, EFLS617STT, EWFLS70JIW.

• https://www.appliancepartspros.com/frigidaire-motor-242219206-ap6976197.html
• https://www.appliancepartspros.com/frigidaire-motor.html