LG Dryer Error Code E13: Meaning and Fix
Reading the dryer display
On a dryer the code shows in the time-remaining window or as blinking status lights. Write down the characters before you press anything, because starting a new cycle usually clears the display. LG codes are short letter pairs; a capital O differs from a zero.
LG appliances show short alphabetic codes (OE, IE, UE on washers, Er plus letters on refrigerators) and, on ThinQ models, a Smart Diagnosis option. LG also builds many Kenmore Elite units. The codes apply to model numbers such as LDF7774ST, LDT5678SS and DLEX3900B; check the label on your unit to confirm yours.
What causes E13
- Kinked or crushed drain hose
- Clog at the end of the hose
- Drain hose extended too far
- Frozen water in the sump
How to fix it
- Pause the dryer and check the drain hose for kinks or twists.
- Clear the end of the hose and make sure it is not submerged.
- Leave the dryer in a warm room if the sump is frozen.
- Press Start/Pause to resume.
- If E13 returns, service the drain pump.
Parts you may need
| Part | Part no. | Buy |
|---|---|---|
| Condensate drain pump | AHA74073802 | Find part |
Part numbers are OEM references; confirm fit by your model number before ordering. Some links are affiliate links; we may earn a commission at no extra cost to you.
Questions
Which dryers show E13?
Hybrid condensing models.
Can I extend the drain hose?
Extended hoses hurt drying performance.
Is it a pump issue?
Sometimes.
Other LG dryer codes
Sources
Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.
Applies to models including DLEX3900B, DLG7401WE, DLEX4200B, DLHC1455W, RV13WB.