LiftMaster Opener Error Code 4-5: Meaning and Fix

4-5
How 4-5 appears on a LiftMaster opener display.
LiftMaster opener code 4-5: RPM sensor
Chamberlain Group product image, chamberlain.com

Also shown as: 45, Up 4 Down 5

Reading the opener display

A garage door opener reports faults through blinking LEDs on the motor head, a diagnostic window on the logic board, or the wall control. Count the flashes slowly and repeat the count before you decide what you saw. On LiftMaster the Learn button color and the count of flashes together identify the board.

LiftMaster, from the Chamberlain Group, is the professional-installer line. Its openers with a yellow Learn button report faults as LED flash counts or two-digit diagnostic codes such as 1-1 or 4-5 on the logic board. The codes apply to model numbers such as 8500W and 87504-267; check the label on your unit to confirm yours.

What causes 4-5

How to fix it

  1. Check the travel module connector.
  2. Test door travel by hand.
  3. Reset limits.
  4. Swap the module if bad.
  5. Retest.

Parts you may need

PartPart no.Buy
Travel module kit041D8071-4Find part
AC travel module kit041D7742-7Find part

Part numbers are OEM references; confirm fit by your model number before ordering. Some links are affiliate links; we may earn a commission at no extra cost to you.

Questions

What is 4-5?

A travel module or movement fault.

Can I clear it?

Reseat the cable and retry.

Do I replace the board?

Check the module first.

Other LiftMaster opener codes

Sources

Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.

Applies to models including 8500W, 87504-267, LJ8900W, 2265, 2280, 1240R, 1345, 8075.