Samsung Dryer Error Code dC: Meaning and Fix

Also shown as: dE, dF, do, d0, 1 DC, 1 dF
Reading the dryer display
On a dryer the code shows in the time-remaining window or as blinking status lights. Write down the characters before you press anything, because starting a new cycle usually clears the display. Samsung codes combine a digit with a letter, and some alternate with the cycle time.
Samsung displays numeric-plus-letter codes such as 4C, 5E or 21E, and many models run a Smart Care self-check through the app. Washers and dryers often use letter pairs, refrigerators use number plus E. The codes apply to model numbers such as DW80R5061US, DW80K7050US and DV45T6000EW; check the label on your unit to confirm yours.
What causes dC
- Door not fully closed
- Failed door switch
- Item caught in the opening
- Worn door latch or strike
How to fix it
- Open the door and clear anything stuck in the seal.
- Close it firmly and listen for the latch.
- Inspect the door latch and strike for wear.
- Test the door switch with a multimeter.
- Replace the latch or switch.
Parts you may need
Questions
Why does the dryer run for a second then stop?
The door switch is not holding.
Is the switch easy to reach?
Usually behind the front panel.
Is this DIY?
Yes for most models.
Other Samsung dryer codes
Sources
Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.
Applies to models including DV45T6000EW, DV45H7000EW, DV42H5000EW, DVE45R6100W, DVG45R6100W, DV50K8600EV.





