LG Dryer Error Code tE1: Meaning and Fix

tE1
How tE1 appears on a LG dryer display.
Dryer thermistor for an LG dryer, a part commonly involved in the tE1 code
Sears PartsDirect product image (LG OEM part AGM30045804)

Also shown as: tE3

Reading the dryer display

On a dryer the code shows in the time-remaining window or as blinking status lights. Write down the characters before you press anything, because starting a new cycle usually clears the display. LG codes are short letter pairs; a capital O differs from a zero.

LG appliances show short alphabetic codes (OE, IE, UE on washers, Er plus letters on refrigerators) and, on ThinQ models, a Smart Diagnosis option. LG also builds many Kenmore Elite units. The codes apply to model numbers such as LDF7774ST, LDT5678SS and DLEX3900B; check the label on your unit to confirm yours.

What causes tE1

How to fix it

  1. Unplug the dryer for a minute.
  2. Restore power and run a short cycle.
  3. Inspect the thermistor connector at the blower housing.
  4. Replace the thermistor if it persists.

Parts you may need

PartPart no.Buy
Dryer thermistorAGM30045804Find part

Part numbers are OEM references; confirm fit by your model number before ordering. Some links are affiliate links; we may earn a commission at no extra cost to you.

Questions

What is the difference with tE2?

tE2 appears in cold conditions.

Can I test it?

Yes with a meter.

Is it cheap?

The thermistor is a low-cost part.

Other LG dryer codes

Sources

Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.

Applies to models including DLEX3900B, DLG7401WE, DLEX4200B, DLHC1455W, RV13WB.