Samsung Washer Error Code 8E: Meaning and Fix
Also shown as: BE, 8C, BC, 8E1, BE1, BC1, BC2
Reading the washer display
On a washer the code appears on the digital display or as a pattern of flashing cycle lights. Note it exactly, including any dashes or sub-codes, then unplug the washer for five minutes and run a short drain cycle to see whether it returns. Samsung codes combine a digit with a letter, and some alternate with the cycle time.
Samsung displays numeric-plus-letter codes such as 4C, 5E or 21E, and many models run a Smart Care self-check through the app. Washers and dryers often use letter pairs, refrigerators use number plus E. The codes apply to model numbers such as DW80R5061US, DW80K7050US and DV45T6000EW; check the label on your unit to confirm yours.
What causes 8E
- Sensor fault
- Washer rocking during spin
- Control board problem
- Loose connector
How to fix it
- Level the washer and make sure it is stable.
- Power cycle for 3 minutes.
- Run an empty spin.
- Check the sensor connector.
- Replace the sensor or board if it returns.
Parts you may need
| Part | Part no. | Buy |
|---|---|---|
| Washer Main Control Board Assembly | DC92-01621D | Find part |
Part numbers are OEM references; confirm fit by your model number before ordering. Some links are affiliate links; we may earn a commission at no extra cost to you.
Questions
Is 8E the same as BE2?
On some models BE2 means a jammed button; the manual decides.
What does the sensor do?
It detects unbalance and vibration.
Is it safe to keep using?
Not recommended until it is fixed.
Other Samsung washer codes
Sources
Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.
Applies to models including WF45T6000AW, WF45R6100AW, WF42H5000AW, WA50R5200AW, WA45T3200AW, WF50K7500AV.