Home Fault Codes

Samsung Washer Error Code OE: Meaning and Fix

OE
How OE appears on a Samsung washer display.
Samsung Washer Water Level Pressure Switch (part DC96-01703C), shown as the reference photo for code OE
Product photo via AppliancePartsPros.com (Samsung OEM part)

Also shown as: 0E, OC, 0C, 1 OC, 1 0C

Reading the washer display

On a washer the code appears on the digital display or as a pattern of flashing cycle lights. Note it exactly, including any dashes or sub-codes, then unplug the washer for five minutes and run a short drain cycle to see whether it returns. Samsung codes combine a digit with a letter, and some alternate with the cycle time.

Samsung displays numeric-plus-letter codes such as 4C, 5E or 21E, and many models run a Smart Care self-check through the app. Washers and dryers often use letter pairs, refrigerators use number plus E. The codes apply to model numbers such as DW80R5061US, DW80K7050US and DV45T6000EW; check the label on your unit to confirm yours.

What causes OE

How to fix it

  1. Switch the washer off and watch whether water keeps entering the tub.
  2. Close the supply faucets; if the level stops rising, the inlet valve is leaking through.
  3. Clean the drain pump filter and make sure the hose drains freely.
  4. Run an empty cycle without detergent to rule out suds.
  5. Restart after a minute without power.
  6. Replace the inlet valve or pressure switch depending on what the checks show.

Parts you may need

PartPart no.Buy
Washer Water Level Pressure SwitchDC96-01703CFind part
Washer Water Inlet ValveDC62-30314KFind part

Part numbers are OEM references; confirm fit by your model number before ordering. Some links are affiliate links; we may earn a commission at no extra cost to you.

Questions

Can a bad inlet valve cause OE?

Yes. A valve that does not seal keeps feeding water even when the washer is idle.

Should I shut off the water?

Yes, close the faucets whenever you suspect the valve is passing water.

Is it dangerous?

It is mainly a water-damage risk. Unplug the washer before opening any panels.

Other Samsung washer codes

Samsung Washer Water Inlet Valve (part DC62-30314K), shown as the reference photo for code 4C4CWater supply error (washer not filling)Samsung Washer Water Inlet Valve (part DC62-30314K), shown as the reference photo for code 4C24C2Hot and cold hoses swappedSamsung Washer Water Level Pressure Switch (part DC96-01703C), shown as the reference photo for code LCLCLeakage or water level errorSamsung Washer Drain Pump (part DC31-00054D), shown as the reference photo for code 5C5CDrain error (no drain)Samsung Washer Main Control Board Assembly (part DC92-01621D), shown as the reference photo for code bE2bE2Jammed button errorSamsung Washer Main Control Board Assembly (part DC92-01621D), shown as the reference photo for code 9C19C1Voltage or power error

Sources

Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.

Applies to models including WF45T6000AW, WF45R6100AW, WF42H5000AW, WA50R5200AW, WA45T3200AW, WF50K7500AV.