Samsung Washer Error Code dC: Meaning and Fix
Also shown as: dS, d5, FL, LO, dE, dE1, dE2, dL, 1 dC
Reading the washer display
On a washer the code appears on the digital display or as a pattern of flashing cycle lights. Note it exactly, including any dashes or sub-codes, then unplug the washer for five minutes and run a short drain cycle to see whether it returns. Samsung codes combine a digit with a letter, and some alternate with the cycle time.
Samsung displays numeric-plus-letter codes such as 4C, 5E or 21E, and many models run a Smart Care self-check through the app. Washers and dryers often use letter pairs, refrigerators use number plus E. The codes apply to model numbers such as DW80R5061US, DW80K7050US and DV45T6000EW; check the label on your unit to confirm yours.
What causes dC
- Door not fully shut or laundry caught in the opening
- Damaged door lock switch
- Worn door latch or lock
- Child Lock combined with water in the tub
How to fix it
- Open the door and clear anything caught in the gasket area.
- Close firmly until the latch clicks.
- Look at the latch hook and lock for cracks or wear.
- Turn off Child Lock if it is on.
- Reset power for a minute.
- Replace the door lock assembly if the code stays.
Parts you may need
Questions
On some models dC means unbalanced load. Why?
Samsung reuses the label; your manual tells you which meaning applies.
Why does it appear with no cycle running?
Child Lock plus water in the tub can raise it, and the washer drains the tub if the door is not closed within 30 seconds.
Is the latch hard to replace?
It is a straightforward DIY on most front loaders.
Other Samsung washer codes
Sources
Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.
Applies to models including WF45T6000AW, WF45R6100AW, WF42H5000AW, WA50R5200AW, WA45T3200AW, WF50K7500AV.