Home Fault Codes

LG Washer Error Code CE: Meaning and Fix

CE
How CE appears on a LG washer display.
Drive motor for an LG washer, a part commonly involved in the CE code
Sears PartsDirect product image (LG OEM part 4417EA1002Y)

Reading the washer display

On a washer the code appears on the digital display or as a pattern of flashing cycle lights. Note it exactly, including any dashes or sub-codes, then unplug the washer for five minutes and run a short drain cycle to see whether it returns. LG codes are short letter pairs; a capital O differs from a zero.

LG appliances show short alphabetic codes (OE, IE, UE on washers, Er plus letters on refrigerators) and, on ThinQ models, a Smart Diagnosis option. LG also builds many Kenmore Elite units. The codes apply to model numbers such as LDF7774ST, LDT5678SS and DLEX3900B; check the label on your unit to confirm yours.

What causes CE

How to fix it

  1. Close the faucets and unplug the washer.
  2. Reduce the load and plug the washer back in after a minute.
  3. Inspect the harness at the motor for chafed wires.
  4. Restart a short cycle.
  5. If CE returns, stop using the washer and call service.

Parts you may need

PartPart no.Buy
Drive motor4417EA1002YFind part
Main control boardEBR79909506Find part

Part numbers are OEM references; confirm fit by your model number before ordering. Some links are affiliate links; we may earn a commission at no extra cost to you.

Questions

Is CE a safety error?

Yes, over-current can overheat wiring.

Can a heavy load trigger CE?

Yes, though repeated CE suggests a hardware problem.

Should I keep retrying?

No. Retrying can damage the motor or board.

Other LG washer codes

Drain pump for an LG washer, a part commonly involved in the OE codeOEDrain errorWater inlet valve for an LG washer, a part commonly involved in the IE codeIEWater inlet errorGeneric LG washer image (main control board); the UE code is not tied to one single partUEUnbalanced load errorDoor lock assembly for an LG washer, a part commonly involved in the dE codedEDoor not closed errorDoor lock assembly for an LG washer, a part commonly involved in the dE2 codedE2Door closed but not lockedDrive motor for an LG washer, a part commonly involved in the LE codeLELocked motor error

Sources

Part numbers are OEM references; confirm fit by your model number before ordering. Meanings compiled from manufacturer and parts-retailer documentation; see sources below. Unplug the appliance before opening it.

Applies to models including WM3400CW, WM4000HWA, WT7300CV, WM3600HWA, WKEX200HBA.